Home About Us News Products Technical Jobs Feedback Contact Us
MSDS-EVA Copolymers Your Location : Home > News > MSDS-EVA Copolymers
Company News
Industry News
Licenses
Certificates

3. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW: A-C 430 is grease-like. All other products are white
waxy solids in pellet, prill or powder form. Dust from this product may form an
explosive mixture in air. Not considered hazardous under normal conditions of
use. Can release irritating and/or toxic fumes and vapors if involved in a fire.
MATERIAL SAFETY DATA SHEET
A-C® Ethylene-Vinyl Acetate Copolymers
MSDS Number: ACPA0002 Page 2 of 8
Current Issue Date: April, 2005
POTENTIAL HEALTH HAZARDS
SKIN: May cause mechanical irritation if the product comes into contact with the skin. Contact with
molten material may cause thermal burns.
EYES: May cause mechanical irritation if product comes into contact with the eye.
INHALATION: Not a probable route of exposure under normal conditions of use. Elevated
processing temperatures may generate fumes and vapors which may cause irritation
to the nose and throat.
INGESTION: Not a probable route of exposure. Not considered hazardous.
DELAYED EFFECTS: None known.
Ingredients found on one of the OSHA designated carcinogen lists are listed below.
INGREDIENT NAME NTP STATUS IARC STATUS OSHA LIST
Vinyl Acetate None. 2B None.


4. FIRST AID MEASURES
SKIN: If in contact with solid material, wash with soap and water. If in contact with molten material,
submerge injured area in cold water. Do not attempt to remove material adhering to the skin.
Get medical attention if irritation develops or persists.
EYES: Flush eyes with plenty of water. Get medical attention if irritation develops or persists.
INHALATION: If exposed to vapors at elevated processing conditions, remove to fresh air. Get medical
attention if irritation develops or persists.
INGESTION: Not a probable route of exposure.
ADVICE TO PHYSICIAN: No specific advice, treat symptomatically.


5. FIRE FIGHTING MEASURES
FLAMMABLE PROPERTIES
FLASH POINT: >515 °F (>270 °C)
FLASH POINT METHOD: Open cup.
AUTOIGNITION TEMPERATURE: Not determined.
UPPER FLAME LIMIT (volume % in air): Not applicable.
LOWER FLAME LIMIT (volume % in air): Not applicable.
FLAME PROPAGATION RATE (solids): Not determined.
OSHA FLAMMABILITY CLASS: Combustible solid.
MATERIAL SAFETY DATA SHEET
A-C® Ethylene-Vinyl Acetate Copolymers
MSDS Number: ACPA0002 Page 3 of 8
Current Issue Date: April, 2005
EXTINGUISHING MEDIA:
Use water fog, dry chemical, carbon dioxide or foam as appropriate for materials in surrounding fire.
Avoid using direct streams of water on molten burning material as it may scatter and spread the fire.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
Melts in proximity to fires resulting in slippery floors and stairs. Static charges on powders or powders
in liquids may ignite combustible atmospheres. Airborne dusts of this product in an enclosed space
and in the presence of an ignition source may constitute an explosion hazard. See NFPA Bulletin 654,
“Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and
Handling of Combustible Particulate Solids,” for safe handling procedures.
SPECIAL FIRE FIGHTING PRECAUTIONS/INSTRUCTIONS:
As in any fire, wear NIOSH/MSHA approved positive pressure self-contained breathing apparatus and
full protective clothing. Watch footing on floors and stairs because of possible spreading of molten
material.


共分4页1234

Add: 26 Baoyuan Road,Yangwu, Qishi, Dongguan, Guangdong, China Zip: 523500 Tel:+86 769 86731758
Copyright © 2023 TOWIN Plastic (EVA) Toys & Gifts Factory All Rights Reserved. Admin  技术支持:东莞网页设计